Engineered for Power. Built for Reliability. Shop Now →
2001-2016 FASS Fuel System Titanium Signature Series PLUS
$739.00
We keep these Fass units in stock and ready to ship!
These lift pumps are a complete kit specific to your Duramax year. You will receive the lift pump with a brand new set of fuel filters, brackets, hardware, harness, and connectors making it a complete package! You will be provided everything needed to install onto your truck!
A FASS Fuel Systems can be a beneficial upgrade for your GM Duramax diesel engine, this is because your Duramax doesn’t come with a factory system like other diesels. This requires your CP3/CP4 injection pump to pull your fuel under a vacuum, adding additional stress to your CP3/CP4 Pump and risk introduce additional air into your fuel. This is where a Titanium FASS Fuel System comes in to help.
That’s exactly why we engineered the Titanium Signature Series PLUS Fuel System, to outlast and outperform anything else on the market. This system is designed to provide the purest possible fuel to your Duramax and built to outlast it.
The Titanium Signature Series PLUS is our premier fuel system for pickup applications, combining high-flow performance, advanced filtration, air/vapor separation, and upgraded components in one complete system. Its steel bracket design provides superior stability while allowing the pump to tuck closer to the frame for better clearance and reduced visibility. The PLUS Series flows up to 290 gallons per hour through 1/2-inch ports and 1/2-inch fuel line, with larger fuel-line configurations available on high-flow applications, and accessory ports allow the installation of heater options for extreme cold weather operation.
The PLUS Series also incorporates an integrated Heat Sink: ORB fittings and 6061 aluminum black anodized fittings pull heat away from the motor, reducing operating temperature and thermal stress. The Heat Sink reduces motor temperature by 20°F or more, further extending the life of the million-mile motor and maintaining consistent performance under demanding conditions. Black anodized ORB (O-Ring Boss) fittings, 6061 aluminum black anodized AN fittings, and black fuel line give the system an ultra-clean installation.
Without proper fuel filtration, diesel injection systems are prone to excessive wear that can cost thousands. The Titanium Signature Series removes over 99% of the water from your fuel along with air, vapor, and debris down to 2 microns absolute, delivering clean, conditioned fuel to your engine at a consistent pressure. It WILL TRIPLE the life of your fuel injection components, and more for the CP4-equipped LML Duramax.
Quantity
2011-2016 Duramax LML S400/VGT Compound Installation Kit
Fits all 2011-2016 Duramax LML 6.6L Diesel Pick up 2500/3500HD Silverado/Sierra with factory VGT turbo or aftermarket drop in turbo that reuses the same flanges as the factory turbo!
The colors listed are the only options we have available and we do not have the ability to get any other colors. If you want a different or custom color, grab a kit and get it repowder coated. We have done this several times and any powder coat shop can easily do that.
For the base installation kit, here's what is included (2nd picture for reference),
Hot side exhaust pipe out of the valley turbo to S400 atmosphere charger with T6 Flange
5" Intake / Dry air filter / Pre filter cover. Has provisions for factory MAF sensors.
Twin turbo coolant tank with level sensor
S400 turbo mount for passenger side of block with integrated oil return built in
4" down pipe and clamp to fit T6 exhaust housings
Full 3" Y bridge with cold side intercooler piping. Y Bridge has extra 1/8th NPT bung for aftermarket boost sensor. It comes with a plug too if not using the port.
Boost charge pipe from atmosphere turbo to valley turbo (Requires standard S400 compressor cover for the atmosphere turbo)
Stainless braided oil feed and return lines (-4 feed and -8 return)
Fine texture black battery tray
Two rolls of heat wrap (one for each exhaust pipe included in the kit)
All boots and clamps needed
Any hardware needed for installation
There will be no turbo included with the base installation kit but can be purchased through us HERE I really like the billet S480's on these trucks, even with stock injectors and a sportsman CP3.
If you do not have these items below, we suggest the following to accommodate the install or may be needed to make it a complete kit.
Our upgraded -10AN return line kit (Highly suggested) Found HERE
Billet Borg Warner Turbocharger T6. Can be 475 or 480 Found HERE
Matching hot side/driver side intercooler pipe Found HERE
T6 heat blanket for atmosphere turbo Found HERE
Matching heat blanket for VGT turbo Found HERE
Compound specific full 2" Passenger up pipe Found HERE
vband assembly for downpipe to front pipe (requires tig welding) Found HERE
LML Breather hose Found HERE
Duramax LML compound kit
LML Duramax compound kit
LML Compound kit
Twin turbo Duramax LML
