2011-2016 Duramax LML CP3 Kit With 10mm Pump - Fleece Performance
FPE-LML-CP3-10: Heavy Duty kit for the LML CP3 conversion features a brand new LBZ/LMM Bosch CP3 equipped with a Fleece Performance 10mm stroker cam along with all of the hardware you need to convert your CP4 equipped Duramax to a CP3. This kit is designed for use with or without a low pressure lift pump. For optimal performance, if the truck is equipped with a lift pump, the feed pressure to the CP3 should not exceed 2 psi. Engine surging may be induced by the additional fuel pressure of a lift pump operating at pressures over 2 psi. If you are intending to combine this kit with a Fleece PowerFlo lift pump, contact us for a lower rate spring for your pump to accommodate operation with this kit. For higher lift pump pressures, FCA table values will require adjustment.
FEATURES
Heavy Duty CP3 with 10mm displacement cam
High flow CP3 feed and return fittings
Preformed feed and return fuel lines
Kit Contents:
CP3 to rail high pressure fuel line
High flow CP3 feed and return fuel fittings
Preformed feed and return fuel lines
CP3 mounting adapter
Dosing injector fuel lines and mounting bracket
FCA extension harness
Low pressure fuel feed lines
Hardware kit