Updated: Jan 2, 2022
Reference the photo below for how the fuel line will be routed. Please note the kit will come as one long hose, it will need to be cut to size. It will start at the quick connect fitting and run down to the tee, then from the tee to the CP3 pump. The three larger clamps are used on each end of the tee fitting and then one at the injection pump barbed fitting.
Jack up the front passenger side of the truck with the appropriate safety equipment such as properly rated jack and jack stands, and remove the front passenger wheel from the vehicle. Pull the front p
Reference the photo below for how the remote oil line will be routed. The 90 degree end will be used up at the turbo. The plug that is provided in the kit will be used to block off the original oil
The factory metal low pressure system lines can removed from the valley of the engine, and trace it back to the driver side rear of the engine. You will need to use a 1/2" quick disconnect tool which
