top of page


Updated: Jan 9, 2022

Reference the photo below for how the remote oil line will be routed. The 90 degree end will be used up at the turbo.

The plug that is provided in the kit will be used to block off the original oil feed line behind the turbo.

The new oil feed line will be picked up on the passenger side of the engine block after the 19mm plug is removed. Beware oil will come out once this plug is removed, so keep a rag handy. You will use the adapter that's provided to thread into this port and that is where the new oil line will start.

439 views0 comments

Recent Posts

See All

Reference the photo below for how the fuel line will be routed. Please note the kit will come as one long hose, it will need to be cut to size. ​ It will start at the quick connect fitting and run do

The 2011 Duramax had a different style low pressure system than the 2012-2016 Duramax LML. Our John C Garage low pressure line for the 2011 consists of the following: ​ Long section of 1/2" Fuel hose

bottom of page